Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
- 2. Engine
   2.2. Operations on engine repair on the car
   2.3. Top dead point of the first cylinder
   + 2.4. Cover of a head of the block of cylinders
   + 2.5. Inlet collector
   - 2.6. Final collector
      2.6.1. Removal
      2.6.2. Installation
   + 2.7. Gear belt and pulleys
   2.8. Replacement of a forward sealing ring of a cranked shaft
   2.9. Replacement of a sealing ring of a camshaft
   + 2.10. Camshaft and pushers
   + 2.11. Head of the block of cylinders
   + 2.12. Oil pallet
   + 2.13. Oil pump
   + 2.14. Drive flywheel / plate
   2.15. Replacement of a back sealing ring of a cranked shaft
   + 2.16. Suspension bracket of the power unit
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
+ 6. Fuel system
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment
вакансии - Москва



2.6.2. Installation

PERFORMANCE ORDER
1. Clear interfaced surfaces of a final collector and a head of the block of cylinders.

2. Establish new laying on racks of a head of the block of cylinders. Pay attention that labels on laying should be directed to a final collector, and the arrow should be directed to a back part of the engine.

3. Fix a final collector nuts, having tightened them in some stages the demanded moment, and a tightening make from the center to the periphery.
4. Further installation is made in sequence, return to removal.
5. Start the engine and be convinced of absence of leakages of exhaust gases.