Toyota Camry

1992-1997 of release

Repair and car operation



Kamri's Toyota
+ General data
+ 1. Maintenance
+ 2. Engine
+ 3. Six-cylinder V6 engines
+ 4. Major maintenance of engines
+ 5. Cooling and heating
- 6. Fuel system
   6.2. General information
   6.3. Pressure removal in fuel system
   - 6.4. Check of the fuel pump
      6.4.2. Check of the pressure created by the fuel pump
      6.4.3. Check of a regulator of pressure of fuel
      - 6.4.4. Check of the relay of the fuel pump
         + 6.4.4.1. Models 1992 and 1993 of year
         - 6.4.4.2. Models 1994 and 1995 of year
            6.4.4.2.2. Main EFI (BOCSH) relay
   6.5. Fuel pump
   + 6.6. Fuel level sensor
   6.7. Fuel tank
   6.8. Air filter
   + 6.9. Accelerator cable
   6.10. Electronic system of injection of EFL fuel
   + 6.11. Fuel system
   6.12. Check of system of injection of fuel
   + 6.13. Check and replacement of elements of system of injection of EFI fuel
   6.14. Fuel highway and fuel nozzles
   + 6.15. Valve of a mode of idling of central air of air
   6.16. Air inlet chamber (only V6 engines)
+ 7. Ignition system
+ 8. Toxicity fall
+ 9. Transmission
+ 10. Automatic transmission
+ 11. Coupling and power shafts
+ 12. Brake system
+ 13. Suspension bracket
+ 14. Body
+ 15. Electric equipment



6.4.4.2.2. Main EFI (BOCSH) relay

PERFORMANCE ORDER
1. Using an ohmmeter, check that resistance between contacts 86 and 85 is equal 0, and between contacts 87 and 30 is equal to infinity.
2. Using additional wires, connect аккумуля Torahs to contacts 85 and 86. Thus resistance between contacts 87 and 30 should be equal 0.
3. Using an ohmmeter, check that resistance between contacts of TS and Е1 both contacts +В and FC is equal 0, and between contacts +В and FP is equal to infinity.
4. Using additional wires, connect аккумуля Torahs to contacts of FT and Е1. Thus resistance between contacts +В and FT should be equal 0.